How to Enter Your Unlock Code

FIND YOUR MAKE OR MODEL BELOW AND FOLLOW THE INSTRUCTIONS!

Motorola Unlock Code Instructions for ALL MOTOROLA MODELS:

How to enter your unlock code:

Remove your working simcard and insert the simcard of a different provider, and when prompted for a subsidy password, enter the code above.

What to do if - "Contact Service Provider", "Tampert Alter", "Wait before enter special Code" message is displayed: If after inserting a simcard from a different provider you notice the message "contact service provider" or any of the messages above, you will need to leave your phone on, at that "contact service provider" screen, for 1-3 hours. Just let it sit on the screen and dont touch any buttons during that time. It will then switch to something like "enter subsidy password", and you can then enter your code.

Model : Motorola L6i & L7i (not L6 and L7 without "i")

1 - Press and hold "*" key by dialing code 787090
2 - The mobile displays: "Menu. Network"
3 - Choose 'yes' and then press OK
4 - The mobile ask you for code
5 - Enter the code for unlocking.

Blackberry Unlock Code Instructions for Bold, Curve, 8300, 8310, 8320, 8800, 8820, 9000:

Model : Bold, Curve, 8300, 8310, 8320, 8800, 8820, 9000

Must be done without a sim card inserted & wireless radios must be turned off.

1. Go to settings.
2. Go to options.
3. Go to advanced options.
4. Go to sim card.
4. Hold the ALT Key while typing in MEPE or MEPD or MEPPE or MEPPD ( not case sensitive ) ( you will not see text appear on screen while typing ).
5. It will say "Enter Network MEP Code, then you type in the unlock code, press in the trackball to confirm.
6. Your phone is now unlocked.

Blackberry Unlock Code Instructions for 9500 Storm:

1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keybord
7. Enter mepd (you will not be able to see the typed info)
8. Enter mep2
9. Now it will say enter network mep code

Blackberry 8700 Unlock Code Instructions:

Go to the Menu -> Options -> Advanced Options -> Sim card press select, while holding the Shift key (bottom right corner CAPS), type mepd. You should now see the five locking categories listed, while holding the alt key, type mep2. Release the alt key. You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked.

Blackberry 8800 Unlock Code Instructions:

***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****

1 - Go to settings menu => and then Options
2 - Select Advanced options => and then Sim card
3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
5 - You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code received from unlockmotorolas.com and press in the track wheel / jog dial to confirm
6 - Your phone is now unlocked

Blackberry 8100 Unlock Code Instructions:

1 - Go to Options Menu => Advanced Options
2 - In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
3 - You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2
4 - Enter the unlock code.

Blackberry 8100 (Vodafone Australia) Unlock Code Instructions:

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS

This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below

1. Take note of the unlocking code shown above

2. Insert a Non-Vodafone Australia working SIM card.

3. Ensure the phone is charged and then switch the phone on.

4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)

5. The phone will then display a message. The most common is “Invalid SIM card”. (Different message? See FAQ below)

6. Select “Turn Wireless Off”

7. Select “Settings” Menu , then go to Advanced Options > SIM Card

8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}

9. When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)

10. Reset the phone by pulling the battery

11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)

Please Note:

If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.

To unblock the phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.

FAQ:

Question: My phone asks to enter a PIN number

Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.

Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.

Answer: The most common message the phone will display is “Invalid SIM card”. Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards - The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display “Insert SIM” “Bad Card”, “Card Error” or “Card Rejected”, confirm the SIM card is inserted correctly – Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.

Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet

Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.

Blackberry Unlock Code Instructions (all other models):

1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked

Blackberry Unlock Code Instructions for 7100 & 7130 Models:

1. On the Home screen, click the Tools icon. The Options screen appears.

2. In the tools screen, select the Settings icon.

3. Scroll to SIM Card and select it. You should see the phone number and the SIM ID number.

4. Type ‘mepp2' to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2) ( you will not see text appear on screen while typing )

5. Input the SIM Unlock code

6. Press in the jog dial once

Blackberry Unlock Code Instructions for 5xxx, 6xxx, 7xxx Models:

Supported models: 5xxx, 6xxx, 7xxx ( Except for 7100 )

1. go to options

2 scroll to SIM CARD then press jog dial in once to select it

3. Type MEPD (not case sensitive) ( you will not see text appear on screen while typing )

4. Does it say Network active? if so your phone is locked

5. Press and hold the alt key (half moon looking key on the lower left side)

6. as you are holding the alt key type in MEPE (not case sensitive) ( you will not see text appear on screen while typing )

7. type in the unlock code when prompted

8. After entering the code press the jog dial in

9. Your phone is now unlocked

Treo 680,650 600 Unlock Code Entry Instructions.

Remove Treo battery,
Insert incorrect SIM card (Any simcard that the phone does not accept)
Power on Treo-650, 'Sim not allowed' is displayed, click OK
Go to the dial pad, and use the stylus to enter MEP code . You must enter the code in the following fashion:
*#*#(MEP-CODE)# then press dial (Where (MEP-CODE) is to be replaced by the ACTUAL code supplied by the unlocking software)
For example if the software supplied 12345678 as your MEP code for your phone , you must enter the code as follows:

*#*#12345678# , then press dial

Again the above numeric code is for illustration purposes, please enter the MEP code as supplied by us. Phone will reset and display sim lock removed

Troubleshooting:

Error Message: "The SIM Lock has NOT been removed from this phone"

Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#CODE# dial

Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.

TREO 750 Unlock Code Entry Instructions

1)Insert NON-Cingular Sim card in the phone

2)The phone will ask for the Unlock Code

3)Please use your Stylus and choose the little Keyboard Icon on the bottom middle of the screen

4)Enter the code on the digital keyboard that appears on the screen

5)Then click again on the little keyboard Icon at the bottom middle

6) Click OK

7)Your phone is now unlocked

If you see a message that says "Timeout" just leave the phone on with that screen and the message will dissapear after a while and prompt you for the unlock code again

Cingular BlackJack Unlock Code Instructions

Step Action
1 Insert NON Cingular SIM into device

2 Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)

3 Enter the unlock code in the blank field

4 Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.

5 Press Ok
- The device is now unlocked and should continue booting

Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted

NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:

Power on your Phone
Enter *#1546792*#
Select Option 3 Network & Call Settings
Select option 5 Network Mode
Select GSM

This should resolve your problem.

Sony-Ericsson Unlock Code Entry Instructions

How to Enter Unlock Codes on Sony-Ericsson Cell Phones
Switch ON your phone without Sim card
Press 1 time the left arrow
Press 2 times the button *
Press 1 time the left arrow
'Personalize with MNC2' will appear
You can now enter your unlock code

If your phone has a 'JOGDIAL' (ex : SonyEricsson K700i) you must press 'Down arrow' instead of 'Left arrow' for step 2 & 3. We mean by 'Down arrow'' to direct the Jogdial down.

LG CU-320 Unlock Code Entry Instructions

1) Power on the Handset.
2) In Idle screen, input the special code "277634#*#".
3)Access the submenu "SIM Test" in Phone Test Mode.
4)Input the special code "2945#*#".
5)Access the submenu "SIM Unlock" which is just activated after the special code
6)Input the 8-digit Unlock code in the "Enter unlock code" input screen.
7)It will be unlocked.

LG U-400 Unlock Code Entry Instructions

1. Insert the Accepted Sim Card.
2. Enter 2945#*88110#.
3. The phone will then prompt 'Unlock sim'. Press OK.
4. The phone will then prompt 'Network Unlock'. Press OK.
5. The phone will then prompt- 'Input Network Control Key'.

Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code.

6. It should give you the message Success.
7. Come back to the main screen and Enter 2945#*88110#.
8. The phone will then prompt unlock sim. Press OK.
9. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code.
10. Then press OK

LG CU-400 Unlock Code Entry Instructions

1-Insert non-Cingular SIM card

2-Power on the handset

- phone will display "Invalid SmartChip"

3-In Idle screen, enter 159753#*#

- phone will display "Enter NCK, Remaining 5"

4-Enter the 8 digit SIM Unlock code

5-Select "OK"

- the handset is now successfully unlocked

LG CU-500 Unlock Code Entry Instructions

How-To Enter Unlock Codes on LG CU500 mobile phones:
Insert a non-Cingular SIM card into your LG CU 500 and power on your phone. When you get the invalid sim-card message/prompt, enter 159753#*# on your phones keypad. On the next screen enter the unlock code provided than press OK.

*if you have a Cingular/at&t LG CU-500, do the following*

1.Insert non-Cingular SIM card.
2.Power on the handset. Phone will display "Invalid SmartChip"
3.(IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
4.In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5
5.Enter the 8 digit SIM unlock code
6.Select "OK". The handset is now successfully unlocked.

LG CU-515 Unlock Code Entry Instructions

1.Put a SP-locked sim in the phone, phone say invalid smart chip
2.Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code
Phone will be unlocked!

LG CU-575/TRAX Unlock Code Entry Instructions

Model : CU575 / Trax

1. Put a non cingular sim in the phone ,phone says invalid smart chip
2. Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits

code

LG TU-720/CU-720/Shine Unlock Code Entry Instructions

Model : LG TU720 CU720 And All Shine SERIES

1) Power ON your phone with an accepted SIM card
2) Type *#865625#UNLOCK CODE
3) Press OK
4) Device is now unlocked

LG VU CU915 & CU920 Unlock Code Entry Instructions

1)Put a AT&T or Cingular SIM in the phone; it does not have to be an active SIM

2)Enter *#865625# then the 16 digit unlock code

3)Device should say: Network Lock Deactivated

4)Phone may automatically reboot

LG U8150 Unlock Code Entry Instructions

Model : LG U8150

1 - Switch ON your phone with a NOT Allowed SIM Card,
2 - Compose : 2, 7, 7, 6, 3, 4, #, *, #,
3 - Go to menu "SIM Lock",
4 - Enter the Unlock Code we send to you.

LG KU990 ViewTV Unlock Code Entry Instructions

1. insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3.Enter 2945#*990#
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete.

LG KE970 Shine Unlock Code Entry Instructions

all other LG KE970 Shine:

1.Switch ON your phone with an allowed SIM card
2.Then compose: 2945#*9701#
3. Press CALL.
4. It should you ask you for the code.

LG Unlock Code Entry Instructions - all other models

How to Enter Unlock Codes On LG Mobile Phones
Step Action
1 Insert non-Cingular SIM card
2 Power on the handset
- phone will display "phone restricted"
3 Select "Cancel"
- phone will display "phone restriction code"
4 Enter the SIM Unlock code
5 Select "OK"
- the handset is now successfully unlocked

Model : LG F2250
With orange sim card in the start menu tape : 2945#*3311# handset show saved then return to startup screen press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show 'Enter NCK' tape your unlock code and OK.

Model : LG U8110
With a not allowed sim card in your phone enter Pin code then validate tape : 277634#*#, select 'Sim Unlock' menu enter NCK code then validate, your phone is now unlocked.

Model : LG U8210
With a not allowed sim card enter Pin code then validate tape : 277634#*#, now you show test menu choose Sim test menu and tape : 2945#*#, choose Sim Unlock menu, handset show 'Enter NCK' tape code Simlock, then OK.

Model : LG U8150
Switch ON your phone with a not allowed Sim card, compose : 277634#*# go to menu 'Sim Lock' and enter your unlock code.

Model : All Others
Switch ON your phone with an allowed sim card and compose :
2945#*5101# - LG 510w
1945#*5101# - LG 1200 & B1200
2945#*5221# - LG 5200 & 52200
2945#*5301# - LG 5300
2945#*5401# - LG 5400
2945#*70001# - LG 7020
2945#*7101# - LG 7100
2945#*1201# - LG 1100 & 1300
2945#*70001# - LG 7250T & 1100
2945#*2201# - LG C2200
2945#*5301# - LG T5100
2945#*3311# - C3310
Go to 'Menu' and then to 'Settings', select 'Security', to finish select 'Network Provider' and select 'Desactivate' then type your unlock code.

For the next models u must insert the original SIM:

LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KE970 press 2945#*9701#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KG290 press 2945#*7101#
LG KG800 press 2945#*7101#
LG KU250 press 2945#*250#
LG KU380 press 2945#*380#

After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.

For next models insert a SIM (not the original SIM):
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
Enter NCK and press OK.

T-Mobile Sidekick/Hiptop

1 - Power ON your phone with different SIM Card then the phone is locked to
2 - The phone will prompt for unlock code
3 - Enter UNLOCK CODE
4 - Device is now unlocked

Samsung P777, D357 , D807, D407 Unlock Code Entry Instructions

Switch on your phone with a non-accepted SIM card. The phone will ask for 'Password'.
You can now enter your unlcok code. (Even if phone doesn't ask for a password, enter the unlock code)
If 'Insert Correct SIM card' message appears: enter #0111*code#
ZX10, ZX20, A707, X497, C417

Power on without sim, type in #7465625*638*Unlock code#

Samsung ZX10, ZX20, A437, X497, C417 Unlock Code Entry Instructions

-Power on without sim, type in #7465625*638*Unlock code#

Samsung Z105 & Z107

Model : Samsung Z105 & Z107

1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #7465625*638*CODE#

Model : All others Samsung

1 - Switch ON your phone with a not Accepted SIM Card,
2 - Phone will ask for "Password",
3 - You can now enter the Unlock Code we send to you.

OR (if phone show "Insert Correct SIM Card")

1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #0111*CODE#

Samsung A737 Code Entry Instructions

insert a sim from any carrier other then the one the phone is locked to, and enter the unlock code (you wont see the code as you enter it). Then just press the OK button (OK button is the center button)

Samsung A127 Code Entry Instructions

#0111*the unlock code#

Samsung J706 Code Entry Instructions

#7465625*638*THE UNLOCK CODE#

HP, 8525, 3125, 2125 & all Windows Smartphones, Windows Pocket PC Phones:

Power on with incorrect sim, enter unlock code when prompted

Enter code using onscreen keyboard when unlocking a Pocket PC Phone

Pantech Unlock Code Instructions

Pantach C150

1) keep your AT&T simcard in the phone.

2) type in *#865625#

3) it will ask for your pass key to unlock. Type the pass key we sent you.

Any other model:

1 - Insert non-accepted SIM card
2 - Power on the device
3 - The display will show "Change SIM" and Left Soft Key will be labeled "Unlock"
4 - Press Left Soft Key - A "Password" box will appear on display
5 - Enter Unlock Code
6 - Press "OK" - Center Soft Key
The device will display "rebooting" and then power cycle
7 - The device is now unlocked

Power on with incorrect sim, enter unlock code when prompted

Enter code using onscreen keyboard when unlocking a Pocket PC Phone

Nokia Unlock Code Instructions for ALL NOKIA MODELS:

READ THESE NOKIA INSTRUCTIONS VERY CAREFULLY. YOU GET 3 TRIES TO ENTER THE CODE, SO IF THERE IS A PROBLEM YOU NEED TO KNOW EXACTLY WHAT TO DO!

-If your Nokia phone gives you a message saying "RESTRICTED", shut down your phone, remove the simcard, power on phone and perform the "CODE ENTRY" instructions below.

-If your phone doesn't say "RESTRICTED", make sure your phone has a simcard from any other provider (other the the one the phone is locked to) and perform the "CODE ENTRY" instructions below.

-If you entered a bad code too many times and get the error "NOT ALLOWED", then your counter is blocked and only a cable method will unlock your phone.

CODE ENTRY INSTRUCTIONS
-The unlock code that must be entered will look something like this: #pw+UNLOCKCODE+1#

In the email you received, you were most likely just sent a code, something like 454545454567715 (every customer has his own special code so yours will be totally different). You must replace that code with the UNLOCKCODE text shown above..so the entire thing to enter into your phone will look like:

#pw+454545454567715+1#

Sometimes we will email you the entire thing so you get #pw+454545454567715+1# but this doesnt happend often.

-Every digit, symbol, number and letter that you see above must be entered without any spaces. Follow the directions below to find put how to get the # p w and +

P appears after pressing 3 times the button ( * )
W appears after pressing 4 times the button ( * )
+ appears after pressing 2 times the button ( * )

- after entering your unlock code the phone should show "SIM Restriction Off". Youg Nokia is now unlocked.

WHAT IF I DIDNT WORK THE FIRST TIME?

First, try these alternate code-entering instructions:

#pw+UNLOCK CODE+7#

so it would look like: #pw+454545454567715+7#

If that doesn't work, contact us and we will recheck the code to make sure the one you receieved is correct.

HP iPaq Series 6315, 6325, 6300, 6515, more:

1 Insert NON Cingular SIM into device
2 Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3 Enter the unlock code in the blank field
4 Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5 Press Ok
- The device is now unlocked and should continue bootingOR
1. On the Today screen, tap Start > Settings.
2. Tap the Phone Band icon.
3. Tap the Keyboard icon to open the virtual keyboard
4. Tap Shift and then Ctl key to enable the keys.
5. Tap the blank area below the band selection box to open the unlock tool.
6. Tap Shift and then Ctl to disable the keys.
7. Enter the 8-digit unlock code and tap OK when done.
8. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
1) Unlock successful.
2) Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
3) Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.

*If you already have an unlock code and sim card but when you input code, it always says " unlock code not accepted, you have tried...." You must update your ROM version . About 5% hp 6315 have this problem.
This problem can easy be resolved with this ROM update ( ROM v1.00.38 )
This rom update will remove all T-mobile logos and sofware and your 6315 will become OEM 6315
dowload here : http://rapidshare.com/files/93634021/SP29760_6315.zip.html
1. Unzip/Extract it using your unzip program (i.e. WinRAR, WinZip, 7zip, etc...)
2. Place the h6315 in cradle. connect it to USB and charger
3. Double click on the hpRUU.exe to run the program
4. View the Readme and if you wish to proceed Agree to the Terms and Conditions
5. Click Next
6. Click Next again to flash the device with the new ROM

SPV Unlock Code Entry Instructions

Model : All SPV

1 - Switch ON mobile with a not Allowed SIM Card,
2 - Enter Unlock Code we send to you.

Model : SPV C500

1 - Switch ON mobile with a not Allowed SIM Card,
2 - The message "PUK2" appear,
3 - Enter the Unlock Code we send to you.
4 - Phone ASK for New Code PIN enter : 0000
5 - Confirm and compose : 0000**
6 - Click "Finish" and phone will show "Network is locked..."
7 - Enter the Unlock Code we send to you and click "Finish"
8 - Restart the Mobile who is Unlocked !

Alcatel Unlock Code Entry Instructions

1 - Switch ON your phone without SIM Card,
2 - Then compose : *#0000*CODE#,
3 - To finish compose : *#0001*CODE#.

Model : 531 - 535

- Without sim card : holding the * and compose 787292
- menu "unlock network" activated select YES and enter code

Ather model

- Switch on your phone with a not accepted SIM Card,
- When the message "Enter Network Key" appear enter the Code

If the phone does NOT ask for the unlock code when you put in another simcard you can enter the NCK in the following way:
###765*08#YOUR CODE

BenQ Unlock Code Entry Instructions

Model : All model